TRC-C250AC Small Hose Cutter — Budget 1″ Compact Cutting Machine
C250AC Small Hose Cutter — Budget-friendly cutter for up to 1″ 4SP hose. Compact size fits tight workshop spaces. The entry point for hydraulic hose cutting.
Description
| Max. Hose Size (Inches) | 1″ 4SH |
| Diameter Blade Ext. (mm) | 250 * 3.5 * 32 |
| Motor (kW): 3PH 380V | 1.5 |
| Velocity @ 50 HZ (rpm) | 2756 |
| Velocity @ 60 HZ (rpm) | 3370 |
| Machine (mm) | 550 x 320 x 450 |
| Machine (Inch) | 21.6 x 12.6 x 17.2 |
| Package (mm) | 700 x 580 x 420 |
| Package (Inch) | 27.5 x 24.8 x 16.5 |
| Net Weight (N.W.) | 22 KG |
| Gross Weight (G.W.) | 31 KG |
A small hose cutter for shops that don’t need 2-inch capacity. The C250AC cuts up to 1-inch 4-spiral hose — enough for light hydraulic assemblies, air conditioning lines, and low-pressure industrial hose. If your daily work stays under 1 inch, paying for a C300’s larger frame and blade doesn’t make sense.
The price is the selling point. The C250AC costs less than any 2-inch cutter because it uses a smaller motor, a shorter blade stroke, and a more compact frame. At roughly half the footprint of a C300, it fits on a workbench that can’t spare the space for a full-size machine.
Operation is the same manual pusher design as the C300. Load the hose, push the lever, the blade cuts through. No CNC, no air supply, no programming. Plug it in and start cutting.
The trade-off is capacity. You can’t cut 1½-inch or 2-inch hose on the C250AC — the blade opening won’t accept it. For shops that occasionally need larger diameters, the C300 is the safer pick. For dedicated small-hose work — AC hose repair, compact equipment service, low-pressure assembly — the C250AC does the job without overpaying for range you won’t use.
Key Specs:
• Cutting range: up to 1″ 4SP
• Control: manual pusher
• Air supply: not required
• Blade: 00/22 cutting wheel (included)
• Best for: small workshops, AC hose repair, budget entry-level cutting
Reviews
There are no reviews yet.