TRC-C300A Hydraulic Hose Cutter Tool — Pneumatic Pusher 2″ Workshop Cutter
C300A Hydraulic Hose Cutter Tool — Pneumatic pusher feeds hose into the blade automatically. Cuts up to 2″ 4SP. Air-powered operation for faster cutting than the manual C300.
Description
| Parameter | Specification |
|---|---|
| Max. Hose Size (Inches) | 2″ 4SH |
| Blade Diameter (Ext. mm) | 300 * 4 * 32 |
| Motor Power (kW) Tri/Mono | 4 / 2.2 |
| Motor Power (HP) Tri/Mono | 5.3 / 2.99 |
| Velocity @ 50Hz / 60Hz | 2850 / 3370 RPM |
| Voltage (Tri / Mono) | 380V / 220V |
| Machine (mm/inch) | 650x600x450 / 25.6×23.6×17.7 |
| Package (mm/inch) | 705x625x740 / 27.8×24.6×29.1 |
| Machine N.W. | 78 KG |
| Machine G.W. | 110 KG |
The C300A hydraulic hose cutter tool splits the difference between the manual C300 and the CNC C300D. A pneumatic pusher replaces the hand lever — load the hose, step on the pedal, the air cylinder feeds it into the blade. Faster than pushing by hand, cheaper than adding a CNC panel.
Same 2-inch 4-spiral cutting capacity as the rest of the C300 family. The difference is entirely in the feed mechanism. The manual C300 makes you push; the C300A uses shop air to do it for you. If you already have a compressor running in your workshop, the C300A adds speed without adding a CNC controller you may never program.
This model is the C300D hardware without the CNC brain — same pneumatic feed, same blade, same body. Some buyers choose the C300A because their operators prefer foot-pedal control over programming a screen. Others start with the C300A and upgrade to the C300D later when batch cutting becomes the norm.
At 650×600×450mm and roughly 110kg, it fits on the same bench as the C300. Optional YL2000 extension stand for long hose lengths.
Key Specs:
• Cutting range: up to 2″ 4SP
• Control: pneumatic pusher (foot pedal)
• Requires: shop air supply
• Blade: 00/22 cutting wheel (included)
• Best for: medium-volume workshop cutting, shops with existing air supply
Reviews
There are no reviews yet.