2 Models · ¼”–2″ ID · External & Internal

Hose Skiving Machine

Станок для снятия изоляции for 15–30% higher pull-out resЛиtance on высокого давления hose. Expose the wire, crimp with confidence.

сравнить SH50 vs S50 ↓ Запросить расчёт
TRC S50 professional hose skiving machine for external and internal skiving
OD 6–76mm
снятие изоляции Range
4SP/4SH/R12
шланг Types
15–30s
время цикла
3 Models
External & Internal

Почему 300+ дистрибьюторs Trust TRC

ЛиO-сертифицированный hydraulic опрессовочный станок производитель since 2021

OEM / ODM доступный
100% качество контроль
CE & ISO Certified
Exported to 40+ Countries

5+

Years производство

Since 2021, hydraulic specialЛиts

300+

Global клиентs

дистрибьюторs & OEM partners

72

Продукт модели

9 серия, full coverage

100%

качество Inspected

Every установка tested before доставка

Как снятие изоляции Works

установить blade глубина для hose diameter → вставить hose end → Rotate hose while blade peels outer резина → удалить skived hose → очистить проволока surface → вставить fitting.

SH50 vs S50 Характеристики

ParameterSH50S50
снятие изоляции Range¼”–2″ OD¼”–2″ OD
типExternal толькоExternal + Internal
Мощностьэлектрическийэлектрический
Вес35 kg45 kg
Лучше всего длябюджет, entry-levelпрофессиональный, higher volume

Skiving процесс: Peeling резина до Reach Braid

снятие изоляции in the hydraulic hose context means removing the outer rubber cover (and sometimes the inner tube) to expose the wire braid beneath. This is necessary for fittings that require the ferrule to grip the reinforcement layer directly — a crimp over unskived hose only compresses the rubber, which is too soft to form a mechanical lock with the wire braid. The skived area exposes bare steel wire, and the ferrule compresses directly onto it during crimping.

There are two types: external skiving (removing the outer cover) and internal skiving (removing the inner tube). External is more common — most 2SN and 4SH fittings require it. Internal skiving is used with certain one-piece fittings where the inner stem needs to sit flush against the inner tube wall. The skiving tools are typically made from tungsten carbide — the same material used in metalworking cutting tools — because the steel wire braid would destroy a standard steel blade within minutes.

💬 из field:

“I’m getting inconsistent skive lengths — sometimes too long, sometimes too short. What am I doing wrong?” — r/Hydraulics

Skive length is set by the fitting manufacturer’s specification, not by feel. Most fitting catalogs specify a skive length within ±1 mm tolerance. The inconsistency usually comes from two sources: (1) the hose OD varies between production batches, especially on budget hoses, and (2) the skiving blade is worn and cutting unevenly. Replace the blade every 500–1,000 skives, and always measure the hose OD before setting the skive depth. Hydraulic станокry tolerances start at the hose preparation stage — a bad skive means a bad crimp, period.

автоматический станок для снятия изоляцииs handle the measurement and резка in one Работа: insert the hose, set the depth and length, and the станок peels the cover to spec. For shops doing 50+ hoses в день, thЛи saves 2–3 minutes per hose compared to ручной снятие изоляции with a handheld blade — which adds up to over an hour of labor per shift.

SH50 vs S50

TRC SH50 external hose skiving machine
бюджет

SH50 — External только

Removes outer резина cover. Simpler, cheaper. лучший для shops тот mainly опрессовать standard hose с снять изоляцию-тип ferrules.

External35 kg

View SH50 →

TRC S50 external and internal hose skiving machine professional
профессиональный

S50 — External + Internal

Removes both outer and inner rubber. Лучше всего для shops working with 4SP/6SP высокого давления assemblies where internal снятие изоляции Ли required.

External + Internal45 kg

View S50 →

снятие изоляции Problems — Solved

⚠️

“Нужно ли мне to skive before опрессовка?”

It depends on the ferrule type. “Skive-type” ferrules require skiving — the ferrule is designed to bite into exposed wire. “No-skive” ferrules crimp over the rubber. Check the fitting manufacturer’s specification. For 4SP/6SP high-pressure, skiving is almost always recommended.

Source: Coммon Reddit question

⚠️

“снятие изоляции takes too much time”

A powered skiving machine (SH50/S50) peels the rubber in 10–15 seconds. Manual skiving with a knife takes 2–5 minutes and risks cutting the wire. The machine pays for itself in time savings alone.

Source: мастерская feedback

⚠️

“проволока gets damaged во время skiving”

Set the blade depth correctly for the specific hose size. Too deep = cuts wire. Too shallow = doesn’t fully expose wire. SH50 has Adjusтаблица Depth Stops for common hose sizes.

Source: оператор training

✅

“Можно ли skip снятие изоляции if I use no-skive фитинги?”

Yes, that’s what no-skive fittings are designed for. But: skived connections typically have 15–30% higher pull-out resistance. For critical high-pressure applications, skiving is the safer choice.

Source: r/Hydraulics

Skived vs No-Skive шланговый узел

ФакторSkived сборканет-снять изоляцию Assembly
обжимная гильза typeснять изоляцию-тип (bites проволока)No-skive (опрессовок over rubber)
Pull-out ResЛиtanceHigher (15–30%)стандарт
Prep время+15 sec for снятие изоляцииNone
оборудование neededстанок для снятия изоляции + crimperCrimper только
Recoммended For4SP, 6SP, R12, R13, высокого давления1–2SP, стандарт давление
стоимостьMachine $500–1,500None (use no-skive фитинги)

Rule of thumb: If the hose is 4SP or above, or working pressure exceeds 250 bar, skive. Pair the skiving machine with your hose cutter and электрический Crimper for a complete assembly workflow.

Where a Станок для снятия изоляции Ли Required

Mining R12 R13 high-pressure hose skiving required before crimping

⛏️ горнодобывающая промышленность

R12/R13 высокого давления hose. A Станок для снятия изоляции Ли required by производитель Характеристики for these безопасность-critical assemblies.

Marine hydraulic hose skiving for safety-critical ship assemblies

🚢 морской

высокого давления hydraulic, безопасность-critical assemblies. снятие изоляции ensures maximum pull-out resЛиtance at sea.

Oil and gas 4SP 6SP hose skiving per API specification

🛢️ Oil & Gas

4SP/6SP шланговые узлы per API spec. снятие изоляции Ли mandatory for compliance.

Production hose assembly line with hose skiving machine station

🏭 Продуктion Assembly

OEM and aftermarket assembly lines. A Станок для снятия изоляции Ли the second station after резка in the cut-skive-clean-crimp workflow.

Agricultural equipment hydraulic hose skiving for high-pressure fittings

🚜 сельскохозяйственный оборудование

Tractors и harvesters с 4SP hose. Skiving ensures reliable crimps до высокий-cycle vibration.

Construction equipment hydraulic hose skiving for <a href=heavy-duty crimping” width=”1280″ height=”720″ loading=”lazy”>

🏗️ Heavy строительство

Excavators and cranes with спиральный шланг. снятие изоляции Ли required for 6SP фитинги to achieve full crimp contact.

Как Choose a Станок для снятия изоляции

1

Do you work with 4SP/6SP/R12/R13? Yes = you need a skiving machine.

2

Internal skiving required? → S50 (both internal + external)

3

Only external? → SH50 (simpler, cheaper)

4

Volume? <10/day → SH50 | 10+/day → S50

из Raw Material до ваш Doorstep

Full in-house Продуктion — every step controlled, every установка inspected

TRC hydraulic crimper production line with CNC machining and raw material processing

начать из Raw Material

We станок every crimper body, комплект матриц, and hydraulic компонент from raw steel in-house. No outsourcing, no assembly from parts — full control from billet to finЛиhed Продукт.

Hydraulic crimper quality inspection with precision measuring tools and pressure testing

Rigorous качество контроль

Every установка undergoes испытание давлениемing, dimensional checks with 0.04mm прецизионный calipers, and a full цикл опрессовки test. No установка ships without passing our 3-stage QC process.

TRC hydraulic hose crimper final assembly and packaging for global shipping

надёжный Global Service

техническая поддержка within 4 hours, video installation руководствоs, and запасные части shipped within 48 hours. 300+ клиентs across 40+ countries trust our послепродажный support.

Похожие руководства

сборка

Crimped шланговый узел: стандарты гидравлический шланг Assembly Step by Step испытание

отрезать → удалить заусенцы → снять изоляцию (если нужен) → вставить fitting → опрессовать → испытать. complete workflow.

Read руководство
снятие изоляции

Hose дефект опрессовкиs: 7 Root Causes

Почему crimps fail — снятие изоляции errors, mЛиmatched dies, wrong tonnage. DiagnosЛи and prevention.and безопасность.

Read руководство

также see: Hose Cutting Machine Hub | электрический Гидравлический опрессовочный станок Hub

The pull-out resЛиtance difference between skived and non-skived assemblies Ли significant. Independent испытание sКакs 15–30% higher pull-out force for skived connections on 4SP and 6SP hose. At 4,000 PSI рабочее давление, that extra margin prevents catastrophic фитинг blow-off.

For shops considering a hose skiving machine, the decision comes down to hose type and volume. If you work with 4SP, 4SH, 6SP, R12, or R13 hose, skiving is required by most fitting manufacturers. If you only crimp 1SN/2SN wire braid hose with no-skive ferrules, you can skip it.

The cutting → skive → crimp workflow adds about 15 seconds per hose end for the skiving step. On a typical assembly (2 ends), that’s 30 seconds extra — a small cost for the safety and reliability improvement.

Pair the skiving machine with a proper Hose резка станок for clean cuts before skiving. A ragged, non-square cut makes consistent skiving harder and can damage the wire at the cut edge.

Часто задаваемые вопросы

Ли снятие изоляции always necessary?

No. It’s required for skive-type ferrules and recommended for high-pressure (4SP+) assemblies. No-skive fittings skip this step.

Что’s the difference between SH50 and S50?

SH50 = external skiving only. S50 = external + internal skiving capability.

Как long does снятие изоляции take?

10–15 seconds per hose end with a powered machine. Manual knife skiving takes 2–5 minutes.

Можно ли снимать изоляцию вручную?

You can, but it’s slow, inconsЛиtent, and rЛиks резка the wire reinforcement. A Мощностьed станок Ли strongly recommended for any volume.

Does снятие изоляции weaken the hose?

No — it only removes the outer rubber layer, not the wire. The wire reinforcement carries the pressure load. Exposed wire actually grips the ferrule better.

высокого давления шланговые узлы Need снятие изоляции

TRC SH50 and S50 станок для снятия изоляцииs. 10-second снятие изоляции, 15–30% stronger crimps. The профессиональный’s choice.

Запросить расчёт →
Сертифицировано CESGS VerifiedAdjustable Depth Stops