P18HP Manual Hydraulic Hose Crimper — 110TON Hand Pump up to 1″ 4SP
P18HP Manual Hydraulic Hose Crimper — 110TON hand-pump pressure, crimps up to 1″ 4SP (6–41mm). 12 die sets included. Lightweight body, no electricity needed. The step up from P16HP for 4SP hose jobs.
Description
| Max Crimping Dia (mm/inch) | 10-54 / 0.39-2.13 |
| Crimping Force (kN/ton) | 1100 / 110 |
| Hose Size ID (inches) | 1″ 4SP |
| Dies Set Series | P18 |
| Max. Opening (mm) | +20 (68 w/o dies) |
| Master Die D/L (mm) | 48 / 64 |
| Motor Power | Hand Pump |
| Machine (mm/inch) | 430x450x320 / 16.9×17.7×12.6 |
| Package (mm/inch) | 625x505x510 / 24.6×19.9×20.1 |
| Net Weight (N.W.) | 45 KG |
| Gross Weight (G.W.) | 55 KG |
| Die Set No. | Range (mm) | ID (mm) | L (mm) |
| P18/06* | 6.0-8.0 | 6 | 55 |
| P18/08* | 8.0-10.0 | 8 | 55 |
| P18/12* | 12.0-14.0 | 12 | 55 |
| P18/14 | 14.0-16.0 | 14 | 55 |
| P18/16 | 16.0-19.0 | 16 | 55 |
| P18/19 | 19.0-23.0 | 19 | 55 |
| P18/23 | 23.0-27.0 | 23 | 55 |
| P18/27 | 27.0-31.0 | 27 | 65 |
| P18/31 | 31.0-36.0 | 31 | 65 |
| P18/36 | 36.0-41.0 | 36 | 65 |
| P18/41 | 41.0-47.0 | 41 | 65 |
Manual hydraulic hose crimper at 110 tons — that’s what the P18HP brings to the table. It fills the gap between the P16HP (95 ton, 1″ 2SP) and the heavier P20HP (137 ton). If you work with 4SP hydraulic hoses up to 1 inch, this is the right tool.
Twelve die sets come with the machine, covering 6mm through 41mm. That’s a wider range than the P16HP, which stops at 45mm max diameter but can’t handle 4SP at the top end. The P18HP can — and that’s the whole point.
Like the rest of the hand-pump series, it runs without electricity. No cords, no air compressor, no battery to charge. Pump the handle, the dies close, the fitting is done. At roughly the same weight class as the P16HP (around 34kg), one person can move it between work bays.
This manual hydraulic hose crimper sells well across Europe — especially in Poland, Germany, and the Nordics — where mobile service technicians need to crimp 4SP hoses on excavators and agricultural equipment in the field. It’s not the cheapest in the lineup, but the 4SP capability makes it worth the extra cost over the P16HP.
Key Specs:
• Crimping force: 110 ton
• Crimping range: up to 1″ 4SP (6–41mm)
• Drive: hand pump (no power needed)
• Die sets included: 12 sizes (6–41mm)
• Weight class: ~34kg (portable by one person)
• Best for: 4SP hose applications, mobile field service, European market
Reviews
There are no reviews yet.