245 Ton CNC Hydraulic Hose Crimper TRC120L
The 245 ton CNC hydraulic hose crimper TRC120L is designed for large-bore industrial hose production. The local product record confirms crimping range 2″ (R13) / 3″ 2SP and maximum crimping force 2450kN / 245 ton. Confirm the hose standard and reinforcement, hose and ferrule outside diameters, target finished crimp diameter, required opening, elbow clearance, workload and power supply before configuration.
描述
TRC120L is a 245 ton CNC hydraulic hose crimper designed for large-bore industrial hose production.
Suitable for small batch production, high efficiency, high stability. Up to 2 inch (R13) or 3 inch 2SP hose. Save operator’s strength by compact ergonomic design make.
The recorded data lists crimping range 2″ (R13) / 3″ 2SP and maximum crimping force 2450kN / 245 ton. These figures are selection data. They do not prove that every hose or fitting within the nominal size is compatible.
Complete recorded specifications
Technical and configuration data
| Parameter | Recorded value |
|---|---|
| Crimping range | 2″ (R13) / 3″ 2SP |
| Maximum crimping force | 2450kN / 245 ton |
| Die series | P20 & YB120L |
| Maximum crimping diameter | 118mm / 4.65 inch |
| 10 mm cycle time | 18 s (10mm) |
| Hose size ID | 2″ (R13) |
| Maximum opening | +52mm |
| Opening without dies | 170mm |
| Master die D/L | 118/97 mm (4.65/3.82 inch) |
| Motor power | 4 kW / 5.44 HP |
| Oil-tank volume | 75 L |
| Motor frequency | 50/60 Hz |
| Three-phase voltage | 200/220/380/440V |
| Single-phase voltage | 100/115/220/230/240V |
| Machine dimensions | 1100×830×1600 mm (43.3×32.7×63.0 inch) |
| Package dimensions | 1025×1025×1740 mm (40.4×40.4×68.5 inch) |
| Net weight | 790 kg |
| Gross weight | 840 kg |
Die set – P20 series
| DieSetNo | Crimp range ID (mm) | L (mm) | Status |
|---|---|---|---|
| P20/06* | 6.0-8.0 | 6 | Optional |
| P20/08* | 8.0-10.0 | 8 | Optional |
| P20/10* | 10.0-12.0 | 10 | Optional |
| P20/12* | 12.0-14.0 | 12 | Optional |
| P20/14 | 14.0-16.0 | 14 | Included |
| P20/16 | 16.0-19.0 | 16 | Included |
| P20/19 | 19.0-23.0 | 19 | Included |
| P20/23 | 23.0-27.0 | 23 | Included |
| P20/27 | 27.0-31.0 | 27 | Included |
| P20/31 | 31.0-36.0 | 31 | Included |
| P20/36 | 36.0-41.0 | 36 | Included |
| P20/41 | 41.0-47.0 | 41 | Included |
| P20/47 | 47.0-52.0 | 47 | Included |
| P20/52 | 52.0-61.0 | 52 | Included |
| P20/61 | 61.0-67.0 | 61 | Included |
Die set – YB120L series(large bore)
| DieSetNo | Crimp range ID (mm) | L (mm) | Status |
|---|---|---|---|
| YB120L/52 | 52.0-57.0 | 52 | Included |
| YB120L/57 | 57.0-63.0 | 57 | Included |
| YB120L/63 | 63.0-69.0 | 63 | Included |
| YB120L/69 | 69.0-74.0 | 69 | Included |
| YB120L/74* | 74.0-79.0 | 74 | Optional |
| YB120L/79* | 79.0-84.0 | 79 | Optional |
| YB120L/84* | 84.0-92.0 | 84 | Optional |
| YB120L/92* | 92.0-100.0 | 92 | Optional |
| YB120L/100* | 100.0-110.0 | 100 | Optional |
Recorded controls and configuration
- Setup Max opening
- Correction / Offset
- Pressure maintaining
- Time delay function
- Speed change
- Quality report
- Pressure control
- Step crimping
- Save crimp data
- Counting
- Setup special die
- Semi-Automatic / Automatic / CNC modes
- Standard configuration: QuickChange tool ×2, Mirror, Electric backstop device, Die racks, Foot pedal ×2 (with Automatic continuous crimping function)
Application boundary and quote inputs
Confirm the hose standard and reinforcement, hose and ferrule outside diameters, target finished crimp diameter, required opening, elbow clearance, workload and power supply before configuration. Included dies, optional dies, adapters, controls, voltage and accessories must be stated line by line in the quotation. Do not describe the machine as universal, and do not infer finished-assembly pressure from machine force alone.
Reviews
There are no reviews yet.