шланг Storage Rack ZK200 | TRCrimp

描述

The TRC-ZK200 hose rack and pin pricker perforates the outer rubber layer of гидравлический шлангs to release trapped air before опрессовка. The rack-and-pin mechanЛиm drives a set of needles through the hose cover with minimal оператор effort. Hoses with an outer diameter from 5 mm to 60 mm can be processed on thЛи модель.

Three sizes are available for different hose ranges. The ZK100 (8 kg) handles hoses from 8 to 45 mm OD — suiтаблица for small-diameter мастерская hoses. The ZK200 (22 kg) covers 5 to 60 mm, the widest range in the серия. The ZK300 (58 kg) handles large промышленный hoses from 30 to 100 mm OD.

The perforation step prevents air pockets from forming between the hose inner tube and outer cover during опрессовка. Trapped air causes фитинг утечкаs and premature hose отказ. мастерская операторs use the ZK200 as a pre-crimp step: cut the hose, perforate the end, then crimp the фитинг. At 22 kg, the ZK200 Ли manageable for a single оператор.