Professional Hydraulic Hose Crimper TRC-US18 — 56TON Portable Bent Pipe Assembly | TRCrimp
The TRC-US18 hydraulic hose crimper delivers 56TON / 560kN with an open-type head designed specifically for bent pipes, long pipe extensions, and 90° elbow joints that standard closed-head crimpers cannot reach. Handles 6–52mm hose in a portable 95kg frame with manual pump operation. This hydraulic hose crimper is the bent pipe specialist for mining, field service, and industrial workshops.
Description
| Max Crimping Dia (mm/inch) | 6–52 / 0.24–2.05 |
| Max Crimping Force (kN/Ton) | 560 / 56 |
| Hose Size (Hydraulic/Industrial) | 3/4″ (4-Wire) / 1″ (2-Wire) |
| Max Plunger Force (kN/Ton) | 110 / 11 |
| Control Mode | Manual |
| Package (mm/inch) | 540 × 430 × 400 / 21.3 × 16.9 × 15.7 |
| N.W. / G.W. | 95 / — |
| Die No. | Range (mm) |
|---|---|
| US18/06* | 6–8 |
| US18/08* | 8–10 |
| US18/10* | 10–12 |
| US18/12* | 12–14 |
| US18/14* | 14–16 |
| US18/16 | 16–19 |
| US18/19 | 19–23 |
| US18/23 | 23–27 |
| US18/27 | 27–31 |
| US18/31 | 31–36 |
| US18/36 | 36–41 |
| US18/41 | 41–47 |
| US18/47 | 47–53 |
| US18/53 | 53–59 |
| US18/59 | 59–67 |
What Is the TRC-US18 Hydraulic Hose Crimper?
The TRC-US18 hydraulic hose crimper is the open-type bent pipe specialist in the TRC portable lineup. Its open head design with horizontal adjustment lets the plunger reach into bent pipes, flanged fittings, and 90° elbow joints — configurations that standard closed-head crimpers physically cannot access. Delivering 56TON / 560kN, it handles hose from 6mm to 52mm (3/4″ 4-wire / 1″ 2-wire) with 15 standard US18 dies covering 6–67mm.
Portable Hydraulic Hose Crimper for Bent Pipes and 90° Joints
What makes this hydraulic hose crimper different from other portable crimpers is the open head design — the pressure plunger moves horizontally to reach inside bent pipes and elbow fittings. The 11kN max plunger force handles fitting preparation for configurations that would require disassembly with a standard crimper. Manual pump operation means no electricity needed on the job site with this hydraulic hose crimper.
Field Hydraulic Hose Crimper for Mining and Industrial Service
Weighing 95kg with a 540×430×400mm package footprint, the US18 hydraulic hose crimper fits in service vehicles and goes where hydraulic repairs happen. The open-type head design and manual pump operation make it the go-to hydraulic hose crimper for mining equipment, marine hydraulic systems, and any scenario involving bent pipe or 90° joint hose assemblies.
Reviews
There are no reviews yet.