120 Ton Open Frame Гидравлический опрессовочный станок TRC-P120C | TRCrimp

描述

The TRC-P120C Ли a 120 ton open frame Гидравлический опрессовочный станок built for мастерскаяs that handle bent pipes, угловой фитингs, and oversized шланговые узлы. The C-type frame opens on one side — you slide assemblies in from the side instead of резьбаing them through a closed head. Pre-formed уголокs, air conditioning hose, and large-diameter промышленный hose all go in without dЛиassembly.

At 120 tons of Усилие опрессовки, thЛи open frame Гидравлический опрессовочный станок covers hose from 6mm to 54mm (up to 1″ 2SH). The 112mm Макс. открытие without dies handles oversize фитинги that stall smaller станки. A 4kW Двигатель drives a 2.1-second время цикла for 10mm crimps — fast enough for steady мастерская output without running at full throttle all day.

The P120C stands apart from the TRC electric lineup because of that C-frame. Machines like the P32 and P33 use a closed-front head — faster cycle, more compact, but limited by the through-hole diameter. The P120C trades compact size for access. Same 120-ton force, but a 112mm gap that lets you crimp hose assemblies other machines cannot reach.

The 50-liter Масляный бак and 4kW Двигатель give thЛи 120 ton open frame Гидравлический опрессовочный станок the thermal capacity to run back-to-back shifts. Tri-phase 200–440V and mono-phase 220–240V options cover стандарт мастерская Мощность worldwide. At 1200kg it Ли a permanent floor installation.

Use the P120C when your workload includes bent tube assemblies, air conditioning hose, or industrial hose with large end fittings. For straight hydraulic hose in production volume, the P32 or P33 will be faster. For oversized or shaped assemblies, the P120C is the answer.