56 Ton Vertical Hydraulic Hose Crimper US18
The 56 ton vertical hydraulic hose crimper US18 is designed for workshop assemblies that need better elbow-loading clearance. The local product record confirms crimping range 1″ 4SP / 1″ 6SP and maximum crimping force 560kN / 56 ton. Confirm the hose standard and reinforcement, hose and ferrule outside diameters, target finished crimp diameter, required opening, elbow clearance, workload and power supply before configuration.
描述
US18 is a 56 ton vertical hydraulic hose crimper designed for workshop assemblies that need better elbow-loading clearance.
US18 is a vertical hydraulic hose crimper with open-frame column design. The pressure column can be adjusted horizontally, allowing easy crimping of long elbow fittings and 90° short elbow connectors. Lighter and more compact than the US20, suitable for workshops with smaller hose assembly volumes.
The recorded data lists crimping range 1″ 4SP / 1″ 6SP and maximum crimping force 560kN / 56 ton. These figures are selection data. They do not prove that every hose or fitting within the nominal size is compatible.
Complete recorded specifications
Technical and configuration data
| Параметр | Recorded value |
|---|---|
| Crimping range | 1″ 4SP / 1″ 6SP |
| Maximum crimping force | 560kN / 56 ton |
| Die series | US18 |
| Двигатель | 0.75 kW |
| Напряжение | Three-phase200/220/380/440V; Single-phase110/115/220/230/240V |
| Frequency | 50/60 Hz |
| Maximum crimping diameter | 10-45mm / 0.39-1.77 inch |
| Hose size ID | 1″ 4SP / 1″ 6SP |
| Die length | 55 mm |
| Opening without dies | 65 mm |
| Oil-tank volume | 5 L |
| Управление | электрический |
| Machine dimensions | 370×420×750 mm (14.6×16.5×29.5 inch) |
| Net weight | 80 KG |
Die set (US18, 13)
| DieSetNo | Crimp range ID (mm) | Status |
|---|---|---|
| US18/06* | 6.0–8.0 | Optional |
| US18/08* | 8.0–10.0 | Optional |
| US18/10* | 10.0–12.0 | Optional |
| US18/12 | 12.0–14.0 | включено |
| US18/14 | 14.0–16.0 | включено |
| US18/16 | 16.0–19.0 | включено |
| US18/19 | 19.0–23.0 | включено |
| US18/23 | 23.0–27.0 | включено |
| US18/27 | 27.0–31.0 | включено |
| US18/31 | 31.0–36.0 | включено |
| US18/36 | 36.0–41.0 | включено |
| US18/41 | 41.0–45.0 | включено |
| US18/45 | 45.0–45.0 | включено |
Application boundary and quote inputs
Confirm the hose standard and reinforcement, hose and ferrule outside diameters, target finished crimp diameter, required opening, elbow clearance, workload and power supply before configuration. Included dies, optional dies, adapters, controls, voltage and accessories must be stated line by line in the quotation. Do not describe the machine as universal, and do not infer finished-assembly pressure from machine force alone.
Отзывы
Отзывов пока нет.