80 Ton 12V Hydraulic Hose Crimper P20CS
The 80 ton 12V hydraulic hose crimper P20CS is designed for service vehicles and field hose repair. The local product record confirms crimping range 1 1/4″ 4SP and maximum crimping force 800kN / 80 ton. Confirm the hose standard and reinforcement, hose and ferrule outside diameters, target finished crimp diameter, required opening, elbow clearance, workload and power supply before configuration.
描述
P20CS is a 80 ton 12V hydraulic hose crimper designed for service vehicles and field hose repair.
P20CS is a portable battery hydraulic crimper powered by 12V or 24V vehicle batteries. One-piece integrated design — pump and crimping head built into a single unit. Push-button operation for straightforward field crimping.
The recorded data lists crimping range 1 1/4″ 4SP and maximum crimping force 800kN / 80 ton. These figures are selection data. They do not prove that every hose or fitting within the nominal size is compatible.
Complete recorded specifications
Technical and configuration data
| Parámetro | Recorded value |
|---|---|
| Crimping range | 1 1/4″ 4SP |
| Maximum crimping force | 800kN / 80 ton |
| Die series | P20 |
| Maximum crimping diameter | 10-54mm / 0.39-2.13 inch |
| Hose size ID | 1 1/4″ 4SP |
| Maximum opening | +25mm |
| Opening without dies | 109mm |
| Master die D/L | 84/80 mm (3.31/3.15 inch) |
| Operación | Battery (12V/24V) |
| Machine dimensions | 500×600×1330 mm (19.7×23.6×52.4 inch) |
| Package dimensions | 625×505×510 mm (24.6×19.9×20.1 inch) |
| Net weight | 55 kg |
| Gross weight | 70 kg |
Die set (P20)
| DieSetNo | Crimp range ID (mm) | Status |
|---|---|---|
| P20/06* | 6.0–14.0 | Optional |
| P20/08* | 8.0–16.0 | Optional |
| P20/14 | 14.0–22.0 | Incluidas |
| P20/16 | 16.0–24.0 | Incluidas |
| P20/19 | 19.0–27.0 | Incluidas |
| P20/23 | 23.0–31.0 | Incluidas |
| P20/27 | 27.0–35.0 | Incluidas |
| P20/31 | 31.0–39.0 | Incluidas |
| P20/36 | 36.0–44.0 | Incluidas |
| P20/41 | 41.0–47.0 | Incluidas |
| P20/47 | 47.0–52.0 | Incluidas |
| P20/52* | 52.0–60.0 | Optional |
Application boundary and quote inputs
Confirm the hose standard and reinforcement, hose and ferrule outside diameters, target finished crimp diameter, required opening, elbow clearance, workload and power supply before configuration. Included dies, optional dies, adapters, controls, voltage and accessories must be stated line by line in the quotation. Do not describe the machine as universal, and do not infer finished-assembly pressure from machine force alone.
Valoraciones
No hay valoraciones aún.