200 Ton CNC Step Crimping Hydraulic Hose Crimper P32D
The 200 ton CNC step crimping hydraulic hose crimper P32D is designed for repeat workshop hose assembly. The local product record confirms crimping range 2″ 4SP and maximum crimping force 2000kN / 200 ton. Confirm the hose standard and reinforcement, hose and ferrule outside diameters, target finished crimp diameter, required opening, elbow clearance, workload and power supply before configuration.
描述
P32D is a 200 ton CNC step crimping hydraulic hose crimper designed for repeat workshop hose assembly.
P32D hose-crimping machine is designed to crimp up to 2″ diameter 4-spiral hoses. Workshop use. Control by CNC system.
The recorded data lists crimping range 2″ 4SP and maximum crimping force 2000kN / 200 ton. These figures are selection data. They do not prove that every hose or fitting within the nominal size is compatible.
Complete recorded specifications
Technical and configuration data
| Parámetro | Recorded value |
|---|---|
| Crimping range | 2″ 4SP |
| Maximum crimping force | 2000kN / 200 ton |
| Die series | P32 |
| Maximum crimping diameter | 10-87mm / 0.39-3.42 inch |
| Hose size ID | 2″ (4SH) |
| Maximum opening | +33mm |
| Opening without dies | 132mm |
| Master die D/L | 99/80 mm (3.90/3.15 inch) |
| Motor power | 3.7 kW(Three-phase) / 5.4-5.3 kW(Single-phase) |
| Oil-tank volume | 42 L |
| Crimps per hour | 700/850 |
| Motor frequency | 50/60 Hz |
| Three-phase voltage | 200/220/380/440V |
| Single-phase voltage | 110/115/220/230/240V |
| Machine dimensions | 650×470×1400 mm |
| Package dimensions | 880×880×890 mm (34.6×34.6×35 inch) |
| Net weight | 305 kg |
| Gross weight | 338 kg |
Die set (P32,19 sizes)
| DieSetNo | Crimp range ID (mm) | L (mm) | Status |
|---|---|---|---|
| P32/06* | 6.0-8.0 | 6 | Optional |
| P32/08* | 8.0-10.0 | 8 | Optional |
| P32/10* | 10.0-12.0 | 10 | Optional |
| P32/12* | 12.0-14.0 | 12 | Optional |
| P32/14 | 14.0-16.0 | 14 | Incluidas |
| P32/16 | 16.0-19.0 | 16 | Incluidas |
| P32/19 | 19.0-22.0 | 19 | Incluidas |
| P32/22 | 22.0-26.0 | 22 | Incluidas |
| P32/26 | 26.0-30.0 | 26 | Incluidas |
| P32/30 | 30.0-34.0 | 30 | Incluidas |
| P32/34 | 34.0-39.0 | 34 | Incluidas |
| P32/39 | 39.0-45.0 | 39 | Incluidas |
| P32/45 | 45.0-51.0 | 45 | Incluidas |
| P32/51 | 51.0-57.0 | 51 | Incluidas |
| P32/57 | 57.0-63.0 | 57 | Incluidas |
| P32/63 | 63.0-69.0 | 63 | Incluidas |
| P32/69 | 69.0-75.0 | 69 | Incluidas |
| P32/74* | 74.0-80.0 | 74 | Optional |
| P32/78* | 78.0-87.0 | 78 | Optional |
Recorded controls and configuration
- Setup Max opening
- Correction / Offset
- Pressure maintaining
- Time delay function
- Speed change
- Quality report
- Pressure control
- Step crimping
- Save crimp data
- Counting
- Setup special die
- Semi-Automatic / Automatic / CNC modes
- Standard configuration: QuickChange tool ×2, Die racks ×3, Foot pedal ×2 (with Automatic continuous crimping function)
Application boundary and quote inputs
Confirm the hose standard and reinforcement, hose and ferrule outside diameters, target finished crimp diameter, required opening, elbow clearance, workload and power supply before configuration. Included dies, optional dies, adapters, controls, voltage and accessories must be stated line by line in the quotation. Do not describe the machine as universal, and do not infer finished-assembly pressure from machine force alone.
Valoraciones
No hay valoraciones aún.