85 Ton Nut Crimping Machine NC30
The 85 ton nut crimping machine NC30 is designed for fitting or nut production, not hose-assembly crimping. The local product record confirms crimping range 10-93mm / 0.39-3.66 inch and maximum crimping force 850kN / 85 ton. Send the workpiece drawing, material, before/after dimensions, tolerance, tooling interface, cycle target and utility conditions before selection.
描述
NC30 is a 85 ton nut crimping machine designed for fitting or nut production, not hose-assembly crimping.
NC machine provide fast and accurate crimping for fitting manufacturing. Crimping range is 10-93 mm. Semi-Automatic / Automatic / CNC modes.
The recorded data lists crimping range 10-93mm / 0.39-3.66 inch and maximum crimping force 850kN / 85 ton. These figures are machine-selection data; actual capability must be checked against the workpiece, tooling and required process.
Complete recorded specifications
Technical and configuration data
| Parámetro | Recorded value |
|---|---|
| Crimping range | 10-93mm / 0.39-3.66 inch |
| Maximum crimping force | 850kN / 85 ton |
| Die series | NC30 |
| Maximum crimping diameter | 10-93mm / 0.39-3.66 inch |
| 10 mm cycle time | 14 s (10mm) Tri/Mono |
| Hose size ID | 2″ |
| Opening without dies | 140mm |
| Master die D/L | 134/33 mm (5.28/1.30 inch) |
| Motor power | 3.0 kW(Three-phase) / 5.5 kW(Single-phase) |
| Oil-tank volume | 50 L |
| Motor frequency | 50/60 Hz |
| Three-phase voltage | 200/220/380/440V |
| Single-phase voltage | 110/115/220/230/240V |
| Machine dimensions | 820×750×1030 mm (32.3×29.5×40.6 inch) |
| Package dimensions | 925×925×1220 mm (36.4×36.4×48.0 inch) |
Die set (NC30)
| DieSetNo | Crimp range ID (mm) | L (mm) | Status |
|---|---|---|---|
| NC30/10 | 10.0-12.0 | 10 | Incluidas |
| NC30/12 | 12.0-14.0 | 12 | Incluidas |
| NC30/14 | 14.0-16.0 | 14 | Incluidas |
| NC30/16 | 16.0-19.0 | 16 | Incluidas |
| NC30/19 | 19.0-22.0 | 19 | Incluidas |
| NC30/22 | 22.0-26.0 | 22 | Incluidas |
| NC30/26 | 26.0-30.0 | 26 | Incluidas |
| NC30/30 | 30.0-34.0 | 30 | Incluidas |
| NC30/34 | 34.0-41.0 | 34 | Incluidas |
| NC30/39 | 39.0-45.0 | 39 | Incluidas |
| NC30/45 | 45.0-51.0 | 45 | Incluidas |
| NC30/51 | 51.0-57.0 | 51 | Incluidas |
| NC30/57 | 57.0-63.0 | 57 | Incluidas |
| NC30/63* | 63.0-69.0 | 63 | Optional |
| NC30/81 | 81.0-93.0 | 81 | Incluidas |
Recorded controls and configuration
- Standard configuration: Die racks, Foot pedal
Application boundary and quote inputs
Send the workpiece drawing, material, before/after dimensions, tolerance, tooling interface, cycle target and utility conditions before selection. The quotation must identify the workpiece, tooling interface, controls, power configuration and supplied accessories. Capability must be checked against the approved drawing and process requirement.
Valoraciones
No hay valoraciones aún.