50 Ton Nut Crimping Machine NC20
The 50 ton nut crimping machine NC20 is designed for fitting or nut production, not hose-assembly crimping. The local product record confirms crimping range 12-49mm / 0.47-1.93 inch and maximum crimping force 500kN / 50 ton. Send the workpiece drawing, material, before/after dimensions, tolerance, tooling interface, cycle target and utility conditions before selection.
描述
NC20 is a 50 ton nut crimping machine designed for fitting or nut production, not hose-assembly crimping.
NC machine provide fast and accurate crimping for fitting manufacturing. Crimping range is 12-49 mm. Semi-Automatic / Automatic modes.
The recorded data lists crimping range 12-49mm / 0.47-1.93 inch and maximum crimping force 500kN / 50 ton. These figures are machine-selection data; actual capability must be checked against the workpiece, tooling and required process.
Complete recorded specifications
Technical and configuration data
| Parámetro | Recorded value |
|---|---|
| Crimping range | 12-49mm / 0.47-1.93 inch |
| Maximum crimping force | 500kN / 50 ton |
| Die series | NC20 |
| Maximum crimping diameter | 12-49mm |
| 10 mm cycle time | 15 s (10mm) |
| Hose size ID | 1/4″ |
| Maximum opening | +18mm |
| Opening without dies | 117mm |
| Master die D/L | 99/22 mm (3.90/0.87 inch) |
| Motor power | 3.0 kW(Three-phase) / 4.0 kW(Single-phase) |
| Oil-tank volume | 50 L |
| Motor frequency | 50/60 Hz |
| Three-phase voltage | 200/220/380/440V |
| Single-phase voltage | 110/115/220/230/240V |
| Machine dimensions | 820×750×1030 mm (32.3×29.5×40.6 inch) |
| Package dimensions | 925×925×1220 mm (36.4×36.4×48.0 inch) |
| Net weight | 287 kg |
| Gross weight | 317 kg |
Die set (NC20,unmarked dies included)
| DieSetNo | Crimp range ID (mm) | L (mm) | Status |
|---|---|---|---|
| NC20/12 | 12.0-16.0 | 12 | Incluidas |
| NC20/16 | 16.0-22.0 | 16 | Incluidas |
| NC20/22 | 22.0-26.0 | 22 | Incluidas |
| NC20/26 | 26.0-34.0 | 26 | Incluidas |
| NC20/34 | 34.0-39.0 | 34 | Incluidas |
| NC20/39 | 39.0-49.0 | 39 | Incluidas |
Recorded controls and configuration
- Standard configuration: Die racks, Foot pedal
Application boundary and quote inputs
Send the workpiece drawing, material, before/after dimensions, tolerance, tooling interface, cycle target and utility conditions before selection. The quotation must identify the workpiece, tooling interface, controls, power configuration and supplied accessories. Capability must be checked against the approved drawing and process requirement.
Valoraciones
No hay valoraciones aún.